Sealing Wood Panels with Shellac for egg tempera painting (Will RSG adhere to shellac?)ApproveRejectUn-ApproveSubscribeUn-Unsubscribe
Question asked 2019-03-15 13:06:25 ...
Most recent comment 2019-04-17 02:58:48
Egg Tempera
Rigid Supports
Grounds / Priming
I have two questions regarding my particular case of preparing cradled plywood panels for egg tempera painting
1. Will traditional RSG and/or RSG gesso adhere to a panel that has been sprayed or brushed with Shellac?
2. Is it reasonable to seal a plywood panel with Shellac to keep moisture out and then use that panel with traditional RSG and/or gesso? From my research and experience it is common to simply size wooden panels with RSG first, and then continue to apply RSG gesso. However given the hygroscopic nature of both the wood and RSG, wouldn't sealing with Shellac first at least help reduce movement and other problems caused by moisture? The panel manufacturers I have been talking to in New York certainly encourage sealing panels with Shellac but the majority of their customers are working with acrylic and oils, not traditional gesso and egg tempera. What do you think?
Thank you, I love this forum btw!
Eli
Eli Bornowsky
EditDelete
Moderator Answer
(brian baade)
Sealing with shellac is fine under an oil ground but I would
not suggest applying shellac to the surface of a panel that will receive a glue
bound ground. It would only cut adhesion and make the failure of the ground
more likely. It would be fine to seal the edges and back with shellac but I
would probably do that after completing the painting (a case could be made to
do it first as well).
EditDelete
Moderator Answer
(brian baade)
I like to apply sizing and at least some gesso to the back
of the panel, if it is not very small, to diminish warping so I would seal
after. Not getting shellac on the paint on the front is a reason for doing it
first. You could always sand off anything that got on the front of the panel
before sizing and applying your ground.
This Page Last Modified On:
restricted